Results 1 to 6 of 6

Thread: Python Water changer

  1. #1
    ECAS member

    jasonh's Avatar
    Join Date
    Apr 2012
    Location
    Cape Breton
    Posts
    11

    Python Water changer

    Hey ,

    anyone use a clip or anything to prevent the python from falling out of the aquarium when filling the tank back up

    at times it wants to slide out, i want to prevent this from happening,

  2. #2
    ECAS member

    suebreau's Avatar
    Join Date
    May 2012
    Location
    Moncton
    Posts
    323
    Never used a clip before. When I fill up tank I hold on to the cylinder until all air is out (when you turn on nozzle) then I make sure the cylinder is full of water to prevent bubbles and it stays.

  3. #3
    Super Moderator Chopper Challenge Champion

    komodo182's Avatar
    Join Date
    Jul 2009
    Location
    Charlottetown, PEI
    Posts
    5,054
    I use my glass covers

  4. #4
    ECAS member

    dogfish3's Avatar
    Join Date
    Apr 2012
    Location
    lower sackville,n.s.
    Posts
    49
    I use plastic clap to hold the hose. I did have the hose jump out once.

  5. #5
    ECAS member

    purralot's Avatar
    Join Date
    Feb 2009
    Location
    Lower Sackville
    Posts
    348
    I use my glass tops.
    64 gal bowfront community,46 gal bowfront community tank, 40 gal. bowfront tetra,angelfish 33 gal live bearing
    tank, 20 gal holding tank

  6. #6
    Club Supporter

    Leigh Partridge's Avatar
    Join Date
    Feb 2015
    Location
    Amherst, NS
    Posts
    263
    I do both. I use the tank covers as well as i also get out all of the air of the end of the hose. Also, removing the air let's you drain water without wasting tap water. Gravity fed to the toilet. I use that cover too :P
    100g CA/SA Cichlids 77g Jaguar Cichlid
    40g SA Cichlids 36g Convict fry

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •